membrane module
英 [ˈmembreɪn ˈmɒdjuːl]
美 [ˈmembreɪn ˈmɑːdʒuːl]
膜组件
双语例句
- Design, preparation and performance of spiral wound membrane module for diffusion dialysis
卷式扩散渗析膜组件的设计和制作及废酸回收性能 - Water will be reverse osmosis membrane module desalination.
原水将被反渗透膜组件脱盐。 - Design of maintenance testing system of aerial nitrogen production membrane module based on the PLC control system
基于PLC控制系统的航空制氮膜器维修测试系统设计 - Application of pervaporation membrane module in ethanol separation
渗透汽化膜组件在乙醇分离中的应用 - If not stored under these conditions, microbial growth occurs in the membrane module.
如果不在这些条件下贮存，那么微生物就会在膜组件中生长。 - The effect of configuration on the performance of a hollow fiber membrane module
中空纤维膜组件结构对其膜蒸馏性能的影响 - The process configuration, membrane module and bioreactor are the critical elements of a membrane bioreactor ( MBR) design.
膜生物反应器工艺中，系统构型、膜组件和生物反应器是中试设计中的关键因素。 - Comparative pilot tests on a submerged membrane bioreactor ( mbr) system of hollow-fiber and flat-sheet membrane module
中空纤维帘式与平板式膜组件在浸没式MBR中的对比试用研究 - Optimizing and designing of submerged outside-inside hollow membrane module
浸没外压式中空纤维膜组件的最佳尺度分析 - Study on toughening of epoxy adhesives cured at room temperature for preparation of membrane module
膜组件浇铸用室温固化环氧树脂胶粘剂的增韧研究 - Study on the Bubbling and Backwashing Enhancement of Microfiltration in Submerged Hollow Fiber Membrane Module
鼓泡和反冲洗对浸没式中空纤维膜微滤过程强化作用的研究 - PVDF hollow fiber membrane module and PTFE flat membrane module were compared in the vacuum membrane distillation processes for brine from SWRO desalination process.
采用PVDF中空纤维膜及PTFE微孔平板膜组件对反渗透海水淡化浓盐水的真空膜蒸馏过程进行了研究。 - Study on the Performance of Hollow Fiber Membrane Module Employed in Membrane Distillation for Desalination
用于膜蒸馏海水淡化的中空纤维膜组件性能研究 - The influences of influent concentration, temperature, flowrate, permeation side pressure, additive, membrane module on pervaporation efficiency are discussed.
探讨了原料液浓度、温度、流量、渗透侧压力、添加剂、膜组件型式等因素对渗透蒸发效率的影响； - In this work, a hollow fiber membrane module made from a kind of polyimide was used to separate the methanol MTBE mixtures ( the feed mass fraction of methanol in the range 0.01-0.30), the pervaporation and vapor permeation were all used.
用聚酰亚胺中空纤维膜，对以蒸汽渗透和渗透汽化两种方式分离甲醇/甲基叔丁基醚混合物（甲醇质量分数为0.01～0.30）的效果进行了对比。 - The filtration characteristics of the modified polytetrafluoroethylene membrane module was studied preliminarily, and the deionized water was used in the relevant experiments.
以去离子水作为料液，初步研究了各种因素对改性聚四氟乙烯膜组件过滤性能的影响。 - The material of the membrane module shell is also an important factor.
膜器件的外壳材料对强化效果也有较大影响。 - Optimization design of membrane module structure in membrane bio-reactor
膜生物反应器（MBR）中膜组件结构形式的优化设计初探 - A new type of polypropylene tubular membrane module in rotating tangential flow was designed to experimentally study energy consuming of the polypropylene PA tubular membrane microfiltration.
设计了一种新型旋转切向流聚丙烯管式膜器，实验研究了聚丙烯PA管式膜器的能耗。 - After comparing every mass transfer resistance during membrane extraction process, it is obtained that using hydrophobic membrane module in this system can effectively decrease the membrane resistance and enforce mass transfer.
比较和分析膜萃取过程中各部分传质阻力，可以看出，对于该体系选取疏水膜器，可以有效地减小膜阻，强化传质。 - The optimum design of membrane module structures in membrane bio-reactor is studied and two optimum designs of membrane module structure ( A and B) are presented.
对MBR工艺中的膜组件结构形式进行了优化设计，提出两种优化设计结构（A和B），并通过试验运行证实了膜组件结构形式的改进，对膜通量的维持有促进作用。 - The arrangement plan of membrane module is discussed to treat industrial wastewater, especially the cleaning methods of membrane, the choice and use of cleaning chemicals.
对膜生物反应器（MBR）处理工业废水的膜组件布置方式进行了讨论，并重点讨论了膜的清洗方法、清洗剂的选择和使用中可能出现的问题。 - Through a group of test by means of orthogonal table, influence of suction time, suction suspended time and aeration rate on membrane filtration was investigated. An enhanced mechanical-cleaning membrane module M1 and a mechanical-cleaning membrane module M2 were designed in this research.
试验设计了强化机械清洗膜组件M1和机械清洗膜组件M2，通过正交试验考察了污泥浓度、曝气量、运行膜通量和抽吸时间∶间歇时间对2组膜组件的膜过滤特性的影响。 - The method is to efficiently resume the flux which we name the relaxation of CA-Ti UF tubular membrane module.
CA－Ti复合管式膜经松弛法处理后，可使膜的渗透通量得到恢复。 - This paper investigates the performance of a large-scale flat sheet membrane module used in membrane distillation by means of numerical simulation.
以典型膜蒸馏系统中的大型多层平面膜组件为研究对象，通过数值模拟的方法研究该类组件的性能。 - The hydraulic condition and sludge character of MBR are analyzed, the methods to control depositing layer with different arrangement plan of membrane module are expounded.
分析了MBR运行的进水要求和污泥特征，阐述了不同膜组件布置方式下的沉积层控制方法。 - The purified process of simulated wastewater containing humic acid ( HA) substances by using hollow fiber ultrafiltration membrane module was studied.
研究了用中空纤维超滤膜组件净化含腐殖酸类有机物模拟废水的过程。 - The selected membrane module has good performance which was verified by studying the mechanism of the membrane fouling, and it has effectively solved the defects of the expensive membrane materials and the membrane fouling which limited the development and application of the membrane technology.
然后通过研究膜污染机理验证了所选膜组件的优良性能，进而在一定程度上有效地解决了限制膜技术发展与应用过程中所面临的膜材料价格昂贵和膜易污染的问题。 - In the process of the operation, membrane module was susceptible to pollution, causing the loss of membrane flux, resulting in performance reduction of the membrane and the increase of operating costs, hindering its wide application.
在运行过程中膜组件容易受到污染，造成膜通量下降，导致膜的性能下降和运营成本的增加，阻碍了其在实际中的广泛应用。 - The blockage of membrane module in MBR enhances removal efficiency and ability to resist impact of pollutants, pH and temperature.
MBR中膜的截留作用提高了系统的污染物去除能力和抗污染、pH值和温度的冲击能力。